Rockville Phenom Series RXA-T2 2 Channel High Power Amplifier 2400W Peak Power
Item appears new in an open box with original manufacturers packaging. Box shows minor damage but the contents are unaffected.
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high-quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXA-T2 is a 2 channel high power amplifier with 2,400 Watts peak output, 1,200 Watts RMS output (2 x 600 @ 2 Ohms) and 800 Watts RMS (2x 400 @ 4 Ohms). You can also bridge the amplifier and get 1 x 1,200 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 200 x2 @ 4 Ohms and 300 x 2 @ 2 ohms <1% THD. Most brands do not use CEA compliant ratings because quite simply they do not want you to be able to compare their amps to others on the market. Over here at Rockville, we want you to be able to compare our amps to any brand on the market. For this reason we are supplying you with multiple ratings. The CEA compliant rating should be used when matching up or comparing this amplifier to other CEA compliant brands such as Kicker, Rockford Fosgate, Alpine, etc. We also supply an RMS rating which should be used when comparing with great brands that are not CEA compliant such as Hifonics, Earthquake, Powerbass, etc. The peak rating is simply what the amplifier can hit for a split-second at the highest point of a song. This rating from any brand is not really important. RMS and CEA ratings truly are the most important.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, mute and delay soft start technology, and a crossover band-pass control. The RXA-T2 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class ?G? amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
Rockville RXA-T2 2400 Watt Peak/1200 Watt RMS 2 Channel Car Stereo Amplifier
CEA Compliant Power Ratings:
.....200 Watts RMS x 2 @ 4 Ohms and 1% THD+N
.....300 Watts x 2 @ 2 Ohms < 1% THD
.....1 x 600 Watts bridged @ 4 Ohms < 1% THD
RMS Power Ratings:
.....1200 Watts (2 x 600 Watts RMS) @ 2 Ohms
.....1 x 1200 Watts @ 4 Ohm Bridged Mono
.....800 Watts (2 x 400 Watts RMS @ 4 Ohms) < 1% THD
.....2400 Watts (2 x 1200 @ 2 Ohms or 1 x 2400 @ 4 Ohms)
High-Speed MOSFET Power Supply
Studio-Grade Bipolar Output Stage Transistors
Fully Adjustable 12dB / Octave Crossover
Low Pass 50Hz - 250Hz
High Pass 15Hz - 250Hz
Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
2 Ohm Stable Stereo
4 Ohm Mono Bridgeable
Mute and Delay Soft Start System
High Level Input with Auto Start Smart Turn-On
Full IC-Controlled Protection Circuitry
RCA Preamp Line Output
ELNA Brand Audiophile Capacitors
Status Mode LED Indicator
8 Volt Preamp Circuitry
Minimum THD at Rated Power: < 0.05%
Frequency Response: 10Hz - 40KHz
S / N Ratio: 100dB
Damping Factor: > 200 @ 100Hz
Dual 40 Amp Maxi Fuses
Dimensions: ( W x H x L ) 8.5″ x 1.8″ x 13″
Out of stock